You can buy replacement parts for your Ride on Chilly Bin, or if you are building your own DIY Cooler Scooter, or similar project, you can find all the parts below.
If you are looking for a spare part not listed Please Enquire.
We can supply parts to anywhere in New Zealand.
Got a query? Get in touch with the Go Karts Direct team who will be happy to help you.
Click images to enlarge
Replacement 49cc 4 stroke engine for Petrolhead Ride on Motorised Chilly Bins.
4-Stroke petrol engine, air cooled, with easy to operate with recoil pull start.
Low maintenance and very economical, lightweight design, quiet.
Engine model: Honda 142F design
Displacement: 49cc Single Cylinder Air Cooled overhead camshaft 4 Stroke
Power: 1.5 kw at 6800RPM
Max. Torque: 2.5Nm/4500
Ignition: Transistor Magneto TCI
Fuel tank capacity: 1.3 litres
Fuel Type: 91 or 98
Oil capacity: 250ml
5.5kg Weight
Price $369.00
Click images to enlarge
Fuel Tank Capacity: 1.2L
To suit our Petrolhead Motorised Chilly Bins.
Please Note: This does not include fuel line in photo.
Please see image below to purchase fuel line as a separate item.
Price $39.90
Click images to enlarge
Attaches to CS Fuel tank on our Petrolhead Motorised Chilly Bins.
Please note: Part supplied differs from image.
It has no join.
Price $9.90
Click images to enlarge
Replacement carburetor for our Petrolhead Motorised Chilly Bin 142F engine.
To suit 49cc engine.
Please note: plastic breather pipes are not included.
Price $49.90
Click images to enlarge
Replacement CDI unit for our Petrolhead Motorised Chilly Bin 49cc engine.
Price $39.90
Click images to enlarge
Replacement pull start for our Petrolhead Motorised Chilly bin 142F engine.
To suit 49cc engine.
135mm distance between bolt hole centres.
Hole diameter 8.5mm.
Price $36.90
Click images to enlarge
Replacement Throttle cable to suit our Petrolhead Motorised Chilly Bins.
180cm length
Price $25.90
Click images to enlarge
To suit our Petrolhead Motorised Chilly Bins.
Throttle Assembly with handle.
Strong, good quailty steel.
Price $45.90
Click images to enlarge
Replacement Brake Assembly to suit our Petrolhead Motorised Chilly Bins.
Mechanical Brake Calliper Assembly including brake pads.
To suit CS REAR DISC BRAKE PLATE or brake plates which are 2mm thick.
Price $39.90
Click images to enlarge
CS BRAKE PADS to suit CS DISC BRAKE ASSEMBLY for our Petrolhead Motorised Chilly Bins.
Please specify if you require rectangular brake pads or round brake pads.
Some of the earlier models require round pads.
(see photo inset)
(2 pads per set)
Price $11.90
Click images to enlarge
Replacement Brake Cable to suit our Petrolhead Motorised Chilly Bins.
To suit CS REAR DISC BRAKE ASSEMBLY.
142cm length
Price $21.90
Click images to enlarge
Replacement part for our Petrolhead Motorised Chilly Bins.
4cm distance between holes. 17mm
Price $29.90
Click images to enlarge
REAR DISC BRAKE PLATE to suit our Petrolhead Motorised Chilly Bins.
Diameter: 140mm
Thickness: 2mm
To fit CS DISC BRAKE ASSEMBLY.
Price $29.90
Click images to enlarge
Replacement clutch for Petrolhead Motorised Chilly Bin engines.
3 spring clutch for 49cc engine
Outside diameter 75mm
Price $69.90
Click images to enlarge
Centrifugal clutch gear box for 49cc engine.
Price $79.90
Click images to enlarge
To suit 49cc Engine Drive chain on our Petrolhead Motorised Chilly Bins.
13 Tooth with circlip
Price $19.90
Click images to enlarge
Drive chain to suit our Petrolhead Motorised Chilly Bins.
58 links. 730mm total length.
Pitch#25
Price $19.90
Click images to enlarge
Replacement part for our Petrolhead Motorised Chilly Bins.
Chain guard to protect chain.
Price $45.90
Click images to enlarge
Replacement CHAIN SPROCKET for our Petrolhead Motorised Chilly Bins.
3 x 40mm between holes
74 teeth
Price $29.90
Click images to enlarge
Replacement part for our Petrolhead Motorised Chilly Bins.
To suit CS CHAIN SPROCKET
58 mm diameter.
Price $29.90
Click images to enlarge
Replacement part for our Petrolhead Motorised Chilly Bins.
Diameter 30mm
Width (ridge) 20mm
Price $24.90
Click images to enlarge
On/off switch with wiring complete to suit our motorised chilly bin scooters.
Price $24.90
Click images to enlarge
Replacement Spark Plug for our Motorised Chilly Bin engines.
NGK CR6HSA
Price $13.90
Click images to enlarge
Steering tie rod with rose joints.
185mm length eye to eye.
To suit our Petrolhead Motorised Chilly Bins.
Price $26.90
Click images to enlarge
To suit our Petrolhead Motorised Chilly Bins.
T-Rod steering column
Price $59.90
Click images to enlarge
To suit our Petrolhead Motorised Chilly Bins.
Shaft: 15mm
Shaft length: 63mm
This is the Left Hand Side stub axle when you are sitting on cooler scooter/chilly bin and facing forward.
Price $45.90
Click images to enlarge
To suit our Petrolhead Motorised Chilly Bins.
Shaft: 15mm
Shaft length: 63mm
This is the Right Hand Side stub axle when you are sitting on cooler scooter/chilly bin and facing forward.
Price $45.90
Click images to enlarge
Steering bottom plate- black
To suit our Petrolhead Motorised Chilly Bin.
Price $19.90
Click images to enlarge
To suit our Petrolhead Motorised Chilly Bins.
430mm x 110mm
Price $55.90
Click images to enlarge
To suit our Petrolhead Motorised Chilly Bins.
Price $49.90
Click images to enlarge
These climbing wheels come complete with bearing.
To fit stabilizer wheels for wheelie bar.
Price $25.90
Click images to enlarge
Replacement axle for Petrolhead Motorised Chilly Bins.
565mm length.
Price $84.90
Click images to enlarge
Mud guard to suit our Petrolhead Motorised Chilly Bins.
Suits front & rear wheels.
Price $16.90
Click images to enlarge
Tyre for Petrolhead Motorised Chilly Bin.
4*10-4
Inflated dimensions: 245mm diameter x 88mm width.
4 ply
Price $34.90
Click images to enlarge
3.50/4*10-4
Inner tyre tube for our Petrolhead Motorised Chilly Bins.
Price $15.90
Click images to enlarge
Tyre with Tube 4*10-4.
Buy Tyre & Tube complete for discounted price.
To suit our Petrolhead Motorised Chilly Bins.
Price $46.90
Click images to enlarge
Tyre size 4*10-4.
Replacement part to suit our Motorised Chilly Bin Scooter.
Please note: Rims and tyre (including tube) come separately.
Price $99.90
Click images to enlarge
Tyre size 4*10-4.
Replacement part to suit our Motorised Chilly Bin Scooter.
Please note: Rims and tyre (including tube) come separately.
Price $104.90
Click images to enlarge
Front wheel rim with bearing.
To suit 4*10-4 tyre.
To suit our Petrolhead Motorised Chilly Bins.
2 piece set.
Price $64.90
Click images to enlarge
To suit Front wheel rims with bearing.
Bearing code: 6202RS
Price $11.90
Click images to enlarge
To fit 4*10-4 tyre.
To suit our Petrolhead Motorised Chilly Bins.
2 piece set.
Price $69.90
Website by Acre Technologies
Copyright © 2015 Go Karts Direct.
All rights reserved. This site, the text, images, and video files herin are the copyrighted works of Go Karts Direct. Reproduction in whole or part, on paper, internet, or other medium is prohibited without the express permission of Go Karts Direct.